MOKA SFX MK-C10A Double Nozzle DMX512 Control Digital CO2 Jet Machine

Description

• Spraying range up to 8-10m.
• DMX512 and electric control are supported.
• 6 Meters hose length with quick connector.
• High-quality material, good effect, and long service life.
• Applicable for DJs, bands, bars, pubs, clubs, skating rinks, KTV, family parties, birthdays, celebrations, weddings, and festivals.  

Technical Parameter

• Specification:

             Control Mode: DMX512 control and electric control

             Channels DMX: 1channel - CO2 spray (0-255) on

             Connectable: DMX/power in/out

             Voltage: AC110V / 220V, 60Hz / 50Hz

             Power: 30w

             Range: 8-10 meters

             Pressure rating: up to 1400psi

             Hose length: 6 meters with quick connector

             Product Warranty Time: 1 year

             Packaging shape: Cardboard box with foam inside

             Packing size: 31cm * 28cm * 33cm

             Weight: 4.5kg

             Gross weight: 7kg

• Packing list for each unit:

             1pc CO2 jetting machine

             1pc 6-meter gas hose

             1pc 2-meter DMX cable

             1pc Power cable

             1pc Manual book

How To Use

• Installation： 

           1. Place the CO2 machine in the corresponding position.

           2. Connect the CO2 hose to the gas bottle.

           3. Place the bottle and keep it flat.

           4. Connect the machine with the gas bottle through the hose, the hose on one side connects to the tank, and the other side connects to the machine.

           5. Connect the valve of the gas bottle.

           6. Connect the machine and the console.

           7. Before disassembling, first turn off the bottle valve, let out the gas remaining in the tube, then turn off the power, and finally separate the gas bottle connector.

• Steps To Use:

           1. Connect the machine with the gas bottle via the high-pressure hose, the hose on one side connects with a tank, and the other side connects with the machine.

          2. If you want it controlled by an electric button, connect the power cord of the machine to the electric button. And then press the button to spray CO2.

          3. If you want to control the machine by DMX console. Connect the DMX cable of the machine to the DMX controller. Press the bottom to" DMX" to set the DMX address. And then control the DMX controller to spray CO2.

         4. Before disassembling, firstly turn off the bottle valve let out the gas which remains in the pipe, then turn off the power, and lastly separate the connector of the gas bottle.

Shipping

• U.S. warehouse: 2-5 working days to U.S., 7-12 working days to other areas.
• Spain warehouse: 2-4 working days to Spain, 7-12 working days to other EU regions.
• Poland warehouse: 2-4 working days to Poland, 7-12 working days to the rest of the EU.
• China warehouse: 7-20 working days for direct shipment from China.
• The transportation type depends on the region, and it is uniformly displayed as international shipping. 
• The goods will be sent out within 1-5 working days. After the logistics order number is generated, customer service will send an email to notify you. Please pay attention to the delivery status.
• If you have any questions, please leave a message.
  

Q&A

• Q: How long can the trachea be customized?

            A: The length can be customized according to your needs. The longest is generally not recommended to be over 35 meters, but we also have customers who have made a length of about 50 meters, because the longer the pipe, the more gas will be used in the pipe during use. This will waste more gas and affect the use effect.

• Q: How is the effect, can I jet against people, will it have any effect?

            A: Yes, but it has a safe distance. Please always ensure that no one is within 3 meters of the CO2 column machine in the direction of injection.

• Q: Where to buy carbon dioxide gas?

            A: This gas can generally be purchased at your local store.

• Q: How long can an air column gun spray and can it continue to spray?

            A: The gas column machine can not continue jetting. If the jetting time is too long and the air pressure is too high, the valve may be damaged. In order to ensure that the machine parts have a normal service life, we recommend that each jet be controlled for about 10 seconds, it takes 5 seconds in the middle to blow again. This way, you can avoid damage to the accessories due to improper operation.

• Q: How long is your product warranty? If it’s a quality problem, who undertakes the freight out and home?

            A: 1 year. If the machine is damaged and fails, please contact customer service the first time, and provide your purchase order number, and the video or appearance photos of the product work. we will start the after-sales maintenance service for you, and help you to repair the machine perfectly. During the warranty period, replacement parts are shipped free of charge. For detailed information please refer to the Return Policy.

• Q: Is there any requirement for the gas used?

            A: Generally, the 40L gas cylinders used in our factory are about 6.5-7 pressures, and the pressure will rise again under high-temperature conditions. It can fill up to 24 kg of gas. Generally, it is 23KG, but not less than 18KG. You can refer to these values.

• Q: How far can this machine spray?

            A: The spray height of the machine is affected by the pressure of the cylinder. Normally, it can spray 8-10 meters.

• Q: Is there a relevant certificate?
  

            A: Yes, all of our products are CE, FCC, and ROSH certified and can be exported.

• Q: What to do if the machine does not blow air?

            A: Please provide the video and we will give feedback to our technical department to see if we can guide you to solve the problem. If there is no way, you need to return the machine to the factory for maintenance.

• Q: Why is the gas emitted by our machine sometimes big and small?

            A: Please describe the specific situation and we will give feedback to our technical department to see if we can guide you to solve the problem. If there is no way, you need to return the machine to the factory for maintenance.