Description
Description
- DMX512 control.
- Spray height up to 8-12m.
- 18pcs 3W RGB color mixing high brightness LED.
- High-quality material, good effect, and long service life.
- Applicable for DJs, bands, bars, pubs, clubs, skating rinks, KTV, family parties, birthdays, celebrations, weddings, and festivals.
Technical Parameter
- Specification :
Product weight: 7.3 kilograms
Shipping weight: 11 kilograms
Channel DMX: 6 channels
Product dimensions: 55*37*18 cm
Control: DMX 512/Electric Control Button
Maximum pressure: 1400Psi
Power: 100W
Voltage: AC110V / 220V, 60Hz / 50Hz
Spray height: 8-10 meters
LED: 18 x 3W RGB
(Note: Comes with 6-meter hose)
- DMX 6 Channels Instruction:
- Please Note :
1. We have different power plugs UK plug, AU plug, EU plug, and US plug, please tell us the power supply you need, or we will choose everything according to your country.
2. The high-pressure tube, jet nozzle, and steel wire are susceptible to damage and are thus not covered under the free warranty. This manual contains essential information. Please make sure to read the manual carefully before using this product.
3. The interval between two jet times must not be less than 5 seconds.
4. When powering on, ensure that each component of the smoke column machine is operational.
How To Use
- Steps To Use :
1. Electric control: The operation of the machine is very simple. If the electric control is used, just turn on the machine's power, turn on the gas cylinder, and turn the machine switch to the "ON" position to spray. However, you can’t control the lamp beads of the machine in electronic control.
2. DMX512 control: First connect the signal cable of the machine and turn on the power, set the machine switch to the "DMX" position, and open the safety channel of the first channel. Just operate the remaining 7 channels to control the corresponding functions of the machine.
3. To ensure that the machine accessories have a normal service life, it is recommended to control the continuous spraying time at about 10 seconds each time. When the machine is not needed, if you need to disconnect the air pipe, you must first turn off the gas cylinder switch, and then remove the tube after venting the residual gas in the machine. Otherwise, either end of the tube or the gas cylinder cannot be pulled out.
Shipping
- U.S. warehouse: 2-5 working days to U.S., 7-12 working days to other areas.
- Spain warehouse: 2-4 working days to Spain, 7-12 working days to other EU regions.
- Poland warehouse: 2-4 working days to Poland, 7-12 working days to the rest of the EU.
- China warehouse: 7-20 working days for direct shipment from China.
- The transportation type depends on the region, and it is uniformly displayed as international shipping.
- The goods will be sent out within 1-5 working days. After the logistics order number is generated, customer service will send an email to notify you. Please pay attention to the delivery status.
-
If you have any questions, please leave a message.
Q&A
- Q: How long can the trachea be customized?
A: The length can be customized according to your needs. The longest is generally not recommended to be over 35 meters, but we also have customers who have made a length of about 50 meters, because the longer the pipe, the more gas will be used in the pipe during use. This will waste more gas and affect the use effect.
- Q: How is the effect, can I jet against people, will it have any effect?
A: Yes, but it has a safe distance. Please always ensure that no one is within 3 meters of the CO2 column machine in the direction of injection.
- Q: Where to buy carbon dioxide gas?
A: This gas can generally be purchased at your local store.
- Q: How long can an air column gun spray and can it continue to spray?
A: The gas column machine can not continue jetting. If the jetting time is too long and the air pressure is too high, the valve may be damaged. In order to ensure that the machine parts have a normal service life, we recommend that each jet be controlled for about 10 seconds, it takes 5 seconds in the middle to blow again. This way, you can avoid damage to the accessories due to improper operation.
- Q: How long is your product warranty? If it’s a quality problem, who undertakes the freight out and home?
A: 1 year. If the machine is damaged and fails, please contact customer service the first time, and provide your purchase order number, and the video or appearance photos of the product work. we will start the after-sales maintenance service for you, and help you to repair the machine perfectly. During the warranty period, replacement parts are shipped free of charge. For detailed information please refer to the Return Policy.
- Q: Is there any requirement for the gas used?
A: Generally, the 40L gas cylinders used in our factory are about 6.5-7 pressures, and the pressure will rise again under high-temperature conditions. It can fill up to 24 kg of gas. Generally, it is 23KG, but not less than 18KG. You can refer to these values.
- Q: How far can this machine spray?
A: The spray height of the machine is affected by the pressure of the cylinder. Normally, it can spray 8-10 meters.
-
Q: Is there a relevant certificate?
A: Yes, all of our products are CE, FCC, and ROSH certified and can be exported.
- Q: What to do if the machine does not blow air?
A: Please provide the video and we will give feedback to our technical department to see if we can guide you to solve the problem. If there is no way, you need to return the machine to the factory for maintenance.
- Q: Why is the gas emitted by our machine sometimes big and small?
A: Please describe the specific situation and we will give feedback to our technical department to see if we can guide you to solve the problem. If there is no way, you need to return the machine to the factory for maintenance.
You may also like
Recently viewed
- Opens in a new window.