MOKA SFX MK-CN16 DMX MINI CO2 Confetti Cannon Machine

Description

• Independent research and development and design appearance
• Small and convenient to use
• The machine can be adjusted 45~90 degrees to cover a larger area
• The connection adopts the quick connection method, no need to tighten the screws
• The machine adopts DMX and electronic control two control modes to solve the problem of reducing personnel operation out of synchronization

Technical Parameter

• Specification:

• Package included:

           1pc MINI CO2 Confetti Cannon Machine

           1pc DMX Cable

           1pc Manual

           1pc 3M Gas Hose

How To Use

• Installation preparation：

            1. Open the packing box, count the accessories, and read the manual carefully.

            2. The machine needs a variety of shapes of ordinary scraps of paper or sequins, as well as CO2 / nitrogen.

            3. Please ensure all machine parts are intact before first use.

            4. Carefully check whether the cylinder is in line with national standard cylinders.

• Installation：

           1. The machine is placed in the need-to-place location, and the wheel can be fixed.

           2. Fill the bottle with the required carbon CO2 or N2.

           3. Connect the machine with the gas bottle via the hose, the hose on one side connects with a tank, and the other side connects with the machine.

           4. Put down the bottle and keep it flat.

           5. Put 30 kg of paper in the machine and adjust the angle.

           6. Turn on the valve of the gas bottle.

Shipping

• U.S. warehouse: 2-5 working days to U.S., 7-12 working days to other areas.
• Spain warehouse: 2-4 working days to Spain, 7-12 working days to other EU regions.
• Poland warehouse: 2-4 working days to Poland, 7-12 working days to the rest of the EU.
• China warehouse: 7-20 working days for direct shipment from China.
• The transportation type depends on the region and is uniformly displayed as international shipping. 
• The goods will be sent out within 1-5 working days. After the logistics order number is generated, customer service will send an email to notify you. Please pay attention to the delivery status.
• If you have any questions, please leave a message.
  

Q&A

• Q: Could it (confetti blaster) be used indoors?

            A: We have four models of confetti blasters, manual MK-CN05, DMX MK-CN05A, and mini-size manual MK-CN09, DMX MK-CN16. The big size ones MK-CN05 & MK-CN05A are generally used outdoors for long shoot distances of about 15~18 meters and also can be used indoors if the room is big enough. The smaller ones MK-C09 and MK-CN16 are better for indoor use.

• Q: Do you put CO2 high-pressure pipe with your confetti blaster? How long pipe do you give?

            A: All of our confetti blasters come with 3 meters ( 10 feet) CO2 high-pressure pipe, also the pipe has the correct screw for connecting the CO2 tank based on US/EU standards.

• Q: How long can CO2 pipe be used maximum?

            A: It’s better not to exceed 25 meters (80 feet) of pipe from a 40L tank.

• Q: Can I link several CO2 cylinders to 1 confetti blaster?

            A: You can connect multiple CO2 cylinders to one confetti blaster according to your needs.

• Q: Can I connect 1 CO2 cylinder to several confetti blasters?

            A: Generally one CO2 cylinder is connected with one confetti blaster, maximum to link two machines. Since the gas pressure of one tank is not enough to support several confetti blasters for a good confetti spray effect. What’s more, a full 40L CO2 tank can only supply 1 machine for about 40 seconds working.

• Q: Do you have a DMX control confetti blaster? Has the DMX signal cable been included?

            A: We have 2 models of DMX control confetti blaster MK-CN05A and MINI confetti blaster MK-CN16, it comes with 3 3-meter high-pressure pipe, 2 meters DMX signal cable, and 1.5 meters power cable.

• Q: Does MK-CN16/MK-CN09 only have a size difference with the other models MK-CN05/CN05A?

            A: MK-CN16/MK-CN09 is smaller in size than MK-CN05 and MK-CN05A, and the working principle is different. MK-CN09 just uses a straight nozzle, without the cast aluminum structure like CN05 and CN05A, which is a special structure for spraying confetti higher and farther, and MK-CN09 is more suitable for small venues.

• Q: How long can one 40L gas cylinder be used for a confetti blaster to spray confetti continuously?

            A: A 40L cylinder can offer a maximum of 40 seconds to 1 machine for spraying continuous confetti shoots.

• Q: What is the whirlwind effect of confetti blaster MK-CN05 / MK-05A?

            A: The whirlwind effect is presented by the aluminum casting on the MK-CN05 / CN05A machine. This aluminum casting uses the structure made by the Venturi principle. It is to say, narrow the air flow from coarse to thin to accelerate the gas flow, which in turn makes confetti paper ejected higher and farther.

• Q: Do you have a confetti blaster that has both DMX and manual control modes?

            A: Yes, we have one model- MK-CN05A can be controlled by hand or by DMX console. Others are only controlled manually.

• Q: Can I use powder to confetti blaster?

            A: Yes, someone has tried putting powder in a confetti blaster, but if you need to use powder, please be more careful.

• Q: What is the function of the cast aluminum part? Can I buy it separately?

            A: The cast aluminum part is an internal structure design using the Venturi principle. It can make confetti paper spouted by vortexes farther and higher when the gas passes through the machine. Sure you can buy it individually, but you must confirm whether the nozzle size of your existing machine is fitted with our cast aluminum part.