MOKA SFX MK-F16A 1500W Led Smoke Machine Special Effects

Description 

• Remote /Electric control two control modes, easy to operate.
• Machine heating time is 5 minutes to work, smoke distance up to 6-8 meters. 
• The smoke output from the fog machine is 12000 cubic feet per minute.
• The color fog machine is equipped with 6 high brightness led lamp beads to produce colorful fog.
• Advanced electronic constant temperature and mechanical constant temperature control system, help protect the machine.

Technical Parameter

• Specification:           

             Voltage: AC 110V / 220V, 60Hz / 50Hz   

             Power: 1500W 

             Preheat time: 10 minutes

            The capacity of tank : 2.3liters 

            Fluid consumption(100% output): 12000Cuft/min

            Control methods: Remote control/Wired control

            Smoke distance: 6-8 meters 

            Weight: 6.1kgs 

           Product dimensions: 35*24*21 cm

           Packaging dimensions: 52*31.5*26.5 cm

            Led: 6 pcs RGB LEDs

• Packing list for each unit:       

           1piece Smoke machine

           1piece Power cord 

           1piece Manual 

           1piece Remote controller 

How To Use

• Steps To Use:

             1. This product can be installed in high places(with hangers), or placed on the ground. 

             2. Keep the fog machine flat, do not tilt or flip. Before connecting this unit to the mains power supply, you must add the fluid tank with high-quality fog fluid and check that the nozzle is clean and unobstructed.  

             3. Before connecting to power, you should check whether the voltage you use is suitable for the fog machine or not.

             4. Power cord should be plugged into a grounded electrical outlet, put the switch to “ON”, then fog machine starts warming up, can spray fog after warming up is complete. 

             5. Connect the controllers with the fog machine, then you can control the fog machine with the controllers.

• Control Mode:

            1. Remote Control Key Functions: A/B button control pump, the LED work as Auto model. Powered fog machine to normal operation state, press any key can light LED lamps when the warm-up finishing, then the pump will start to work.

             2. Electronic Control: When the machine heating, the red Indicator light lighting; when it is completed, the green Indicator light lighting, and the button control the pump start to work.

Shipping

• U.S. warehouse: 2-5 working days in the U.S., 7-12 working days in other areas.
• Spain warehouse: 2-4 working days in Spain, 7-12 working days in other EU regions.
• Poland warehouse: 2-4 working days in Poland, 7-12 working days in the rest of the EU.
• China warehouse: 7-20 working days for direct shipment from China.
• The transportation type depends on the region, and it is uniformly displayed as international shipping. 
• The goods will be sent out within 1-5 working days.After the logistics order number is generated, the customer service will send an email to notify you. Please pay attention to the delivery status.
• If you have any questions, please leave a message.

Q&A

• Q: What is the output and injection height of the smoke machine? 

            A: The output power can reach 12000cuft in one minute, and the spray height is about 6-8M.

• Q: How long is the heating time of the machine?

            A: About 5 minutes

• Q: What’s the control mode?

            A: Electric and remote control

• Q: What is the capacity of the fuel tank?

            A: 2.3L

• Q: If the liquid in the tank is used up, will it burn the machine if I continue to run the machine?

             A: No, we have a temperature control system installed inside. When the smoke liquid is used up, it will stop working automatically.

• Q: Will the fog machine liquid pump be blocked for a long time?

             A: It uses the original special smoke liquid, which is not easy to block the machine. 

• Q: What similar models do you have?

            A: 400 W/900 W/1200 W/1500 W fog machine with or without lights are optional

• Q: Can I print a logo? How long is the warranty? What to do if the machine is broken?

             A: Yes we provide customize logos. The warranty period of our machine is one year. If the machine is broken, you can send us a video first. And our technical department will check the machine for problems. If it is a problem with the parts, we will send you the parts that need replacement.

• Q: After the event, if there is liquid in the oil pump, do I need to pour it out?

            A: If there is still oil in the oil pump, let the machine continue to spray smoke, and wait until the oil in the oil pump is finished.

• Q: Can I control the smoke output?

            A: The smoke output of this machine is a quantitative output, and our remote control can only control the change of light.

• Q: What liquid is used in this machine?

            A: Our light tobacco tar, heavy tobacco tar, and fast scattered tobacco tar can all be used on this machine.

• Q: Will the LED 1500w cigarette machine light up when plugged in? Can I control the LED?

            A: Yes