Description
Description
- Spray Height can reach 6-12m.
- Fireworks can adjust the angle 360 degrees.
- DMX512 / Remote Control mode, easy to use.
- Confetti Cannon has a built-in 1800mah lithium battery used anytime, anywhere.
- Independent research and development of lithium battery with short circuit protection.
Notice: We can not ship the confetti cannon shooter together with the confetti machine. Due to the shipping company's policy, the confetti cannon belongs to the dangerous goods series. so you need to buy it at your local market.
Technical Parameter
- Specification :
Voltage: DC12V
Power: 60W
Control Mode: DMX512 / Remote
DMX Channel: 6 Channel
Spray Height: 6-12 m
Charging Time: 4 Hrs
Remote Distance: 50m
Battery Capacity: 1800mAH
N.W: 3KG
G.W: 3.5KG
Product Size : 36 x 12 x 22 cm
Packing Size : 38 x 17 x 24.5 cm
- 6 Channel Description :
Channel 1: Single Shot To Spray
Channel 2: Another Shot To Spray
Channel 3: 2 Shot Spray Together
Channel 4: From Left to Right (Multiple in series)
Channel 5: From Right to Left (Multiple in series)
Channel 6: From the middle to both sides (Multiple in series)
How To Use
- INSTRUCTIONS :
1. Two confetti cannons need to be loaded into the barrels of the two-shot streamer launcher. Each cannon is held in place in the barrel with a thumbscrew, The angle of the transmitter can be adjusted.
2. Open the power.
3. The machine can be operated with DMX or remote, Refer to the above instructions.
Shipping
- U.S. warehouse: 2-5 working days to U.S., 7-12 working days to other areas.
- Spain warehouse: 2-4 working days to Spain, 7-12 working days to other EU regions.
- Poland warehouse: 2-4 working days to Poland, 7-12 working days to the rest of the EU.
- China warehouse: 7-20 working days for direct shipment from China.
- The transportation type depends on the region and is uniformly displayed as international shipping.
- The goods will be sent out within 1-5 working days. After the logistics order number is generated, customer service will send an email to notify you. Please pay attention to the delivery status.
- If you have any questions, please leave a message.
Q&A
- Q: Can the machine spray ribbons except spray confetti paper?
A: Yes.
- Q: Do you sell confetti cartridges?
A: As the confetti cartridge is defined as a flammable and explosive product, we cannot send it. You can buy it locally.
- Q: Where can I buy confetti cartridges?
A: You can buy it on Amazon, Taobao, or locally, it's easy to buy.
- Q: Does the confetti cartridge have a different size? How about the spray height?
A: Yes, confetti cartridges come in different sizes. There are 40.60.80cm.
40cm: spray 5-8 meters
60cm: spray 8-10 meters
80cm: spray 10-12 meters
40cm Ribbon cartridge: spray 5-8 meters
80cm Ribbon cartridge: spray 10-12 meters
- Q: Can you engrave my logo? What’s the MOQ?
A: Yes, we can engrave your logo.
Free engraving for 6 and above, if below 6pcs you need to pay extra.
- Q: Why the confetti cartridges are not sprayed?
A: You may bought a bad-quality confetti cartridge, please change the batch of confetti cartridges.
- Q: How long is your warranty? How about after-sales service?
A: We promise a one-year warranty. If there is any quality problem, we offer accessories for free.
- Q: How often does the machine's fuse burn?
A: The fuse is burned and may caused by unstable voltage. So the machine is not working.
- Q: Is there any requirement for a confetti cartridge?
A: You’d better buy a good quality confetti cartridge and select the length according to your needs.
- Q: Is there a delay in remote control?
A: There is a little bit of delay.
- Q: If I have two confetti machines connected in series, how to make them spray separately?
A: You need to set the DMX address. The first machine is set to d001 and the second one is set to d002. In this situation, the two machines share different channels.
- Q: The machine can’t be controlled by a remote controller, what’s the reason?
A: (1)Please check if the remote controller has power.
(2)Please check if the remote mode is open.
(3)If it is opened.
a.Your remote may broken. Please change the remote to test it again. (Press the enter button on the machine---System settings---Wireless You’ll see if the remote mode is opened, if it is closed, open it.
b.The resistance may be burned. We need to open the machine for a check.
(4)If the wireless mode is closed.
Please press the first remote switch button towards the back of the machine. Four indicators will turn on one by one. When you press the second bottom, the middle two indicators will light up.
Press the bottom“-” indicators off one by one. Press the”+” button, all indicators light up once.
At that time you can control the machine by a remote.
- Q: How to set English?
A: Press the fourth bottom to enter "display setting”, when you see”1. Language”, select English.
- Q: Does the battery confetti machine need to connect with the power cable and DMX cable?
A: For the battery confetti machine there’s no need to connect the power cable after it is fully charged.
When the machines are under series connection, you need to connect them with a controller via a DMX cable. And it’s better to control the machines when you want them to work at the same time as there is no delay.
- Q: How long does it take to fully charge the battery launcher? How long can it be used?
A: It takes 4 hours to fully charge and can be used for 3 hours.
You may also like
Recently viewed
- Opens in a new window.