MOKA SFX H-C07 No Residue Ajustable Angle CO2 Jet Machine

Description

• 0° to 110° adjustable angles for high flexibility.
• No ice slag design, Ice-less shots for your audience.
  
• The far-reaching jet smoke distance can reach 8 to 10 meters.
• The maximum pressure is 1400 Psi. Worrying about overpressure from your tank and causing a machine leak or hose burst is unnecessary.

Product Parameters        

• Specification：

          Voltage: AC110V / 220V, 60Hz / 50Hz

          Power: 25w

          Control mode: DMX512 and electric control

          Spray time: continuous injection for 20 seconds

          Angle: 0-110 degrees adjustable

          Max pressure: 1400psi

          Spray height: 8-10 meters

          Net weight: 6KG

          Gross weight: 9KG

          Packaging dimensions: 32*27*47 cm

          Certification: CE/RoHS/FCC

         Warranty writing time: 1 year

• Package includes :

          1pc CO2 jet machine

          1pc gas hose (contact us to customize size)

          1pc DMX cable

          1pc Power cord

          1pc Manual book 

How To Use

• Installation：

           1. place the large CO2 column in the corresponding position.

           2. connect the CO2 hose to the gas bottle.

           3. place the bottle and keep it flat.

           4. connect the machine with the gas bottle through the hose, the hose on one side connects to the tank, and the other side connects to the machine.

           5. connect the valve of the gas bottle.

           6. Before disassembling, first turn off the bottle valve, let out the gas remaining in the tube, then turn off the power, and finally separate the connector of the gas bottle.

Shipping 

• U.S. warehouse: 2-5 working days to U.S., 7-12 working days to other areas.
• Spain warehouse: 2-4 working days to Spain, 7-12 working days to other EU regions.
• Poland warehouse: 2-4 working days to Poland, 7-12 working days to the rest of the EU.
• China warehouse: 7-20 working days for direct shipment from China.
• The transportation type depends on the region, and it is uniformly displayed as international shipping. 
• The goods will be sent out within 1-5 working days. After the logistics order number is generated, customer service will send an email to notify you. Please pay attention to the delivery status.
• If you have any questions, please leave a message.

Q&A

• Q: How long can the trachea be customized?

            A: The length can be customized according to your needs. The longest is generally not recommended to be over 35 meters, but we also have customers who have made a length of about 50 meters, because the longer the pipe, the more gas will be used in the pipe during use. This will waste more gas and affect the use effect.

• Q: How is the effect, can I jet against people, will it have any effect?

            A: Yes, but it has a safe distance. Please always ensure that no one is within 3 meters of the CO2 column machine in the direction of injection.

• Q: Where to buy carbon dioxide gas?

            A: This gas can generally be purchased at your local store.

• Q: How long can an air column gun spray and can it continue to spray?

            A: The gas column machine can not continue jetting. If the jetting time is too long and the air pressure is too high, the valve may be damaged. In order to ensure that the machine parts have a normal service life, we recommend that each jet be controlled for about 10 seconds, it takes 5 seconds in the middle to blow again. This way, you can avoid damage to the accessories due to improper operation.

• Q: Is there any requirement for the gas used?

            A: Generally, the 40L gas cylinders used in our factory are about 6.5-7 pressures, and the pressure will rise again under high-temperature conditions. It can fill up to 24 kg of gas. Generally, it is 23KG, but not less than 18KG. You can refer to these values.

• Q: How far can this machine spray?

            A: The spray height of the machine is affected by the pressure of the cylinder. Normally, it can spray 8-10 meters.

• Q: Is there a relevant certificate?
  

            A: Yes, all of our products are CE, FCC, and ROSH certified and can be exported.

• Q: What to do if the machine does not blow air?

            A: Please provide the video and we will give feedback to our technical department to see if we can guide you to solve the problem. If there is no way, you need to return the machine to the factory for maintenance.

• Q: Why is the gas emitted by our machine sometimes big and small?

            A: Please describe the specific situation and we will give feedback to our technical department to see if we can guide you to solve the problem. If there is no way, you need to return the machine to the factory for maintenance.

• Q: How long is the machine warranty?

            A: The warranty is one year. If the machine is damaged and fails, please contact customer service the first time and provide your purchase order number and the video or appearance photos of the product work. We will start the after-sales maintenance service for you, and help you repair the machine perfectly. During the warranty period, replacement parts are shipped free of charge.

     But two of the accessories have the following conditions. The warranty will be different. 

1. The connector is consumable. If the customer does not know how to use it, forced to connect these two connectors. It is very easy to damage the joint.
2. The valve because the spool hole in the valve is very small, even if there are very small iron pieces or impurities in the gas, it will cause the plug of the spool. This situation belongs to the gas reason. So if you want to replace the accessories, the cost will have to be paid by the user.

      For detailed information please refer to the Return Policy.